Note
Go to the end to download the full example code
Multi-objective Fonseca-Fleming example with the mNBI algorithm¶
In this example, the modified Normal Boundary Intersection algorithm (mNBI) is used to
solve the FonsecaFleming optimization problem [FF95]:
\[\begin{split}\begin{aligned}
\text{minimize the objective function }
& f_1(x) = 1 - exp(-\sum_{i=1}^{d}((x_i - 1 / sqrt(d)) ^ 2)) \\
& f_2(x) = 1 + exp(-\sum_{i=1}^{d}((x_i + 1 / sqrt(d)) ^ 2)) \\
\text{with respect to the design variables }&x\\
\text{subject to the bound constraint}
& x\in[-4,4]^d
\end{aligned}\end{split}\]
We also show how the Pareto front can be refined.
from __future__ import annotations
from gemseo import configure_logger
from gemseo import execute_algo
from gemseo import execute_post
from gemseo.problems.analytical.fonseca_fleming import FonsecaFleming
configure_logger()
<RootLogger root (INFO)>
Solve the Fonseca-Fleming optimization problem¶
The 3 sub-optimization problems of mNBI are solved with SLSQP, a gradient-based optimization algorithm from the NLOPT library, with a maximum of 100 iterations. The analytic gradients are provided.
opt_problem = FonsecaFleming()
result = execute_algo(
opt_problem,
"MNBI",
max_iter=1000,
sub_optim_max_iter=100,
n_sub_optim=3,
sub_optim_algo="NLOPT_SLSQP",
)
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize FonsecaFleming
INFO - 08:58:58: with respect to x
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: Solving optimization problem with algorithm MNBI:
INFO - 08:58:58: Searching for the individual optimum of each objective
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize f_0
INFO - 08:58:58: with respect to x
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: 1%| | 6/1000 [00:00<00:03, 279.83 it/sec, obj=[3.45593287e-09 9.81688668e-01]]
INFO - 08:58:58: 1%| | 7/1000 [00:00<00:03, 308.12 it/sec, obj=[0. 0.98168436]]
INFO - 08:58:58: 1%| | 8/1000 [00:00<00:02, 334.79 it/sec, obj=[0. 0.98168436]]
INFO - 08:58:58: 1%| | 9/1000 [00:00<00:02, 371.24 it/sec, obj=[0. 0.98168436]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the objective function are closer than ftol_rel or ftol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 11
INFO - 08:58:58: Solution:
INFO - 08:58:58: Objective: 0.0
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+--------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+--------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0.5773502684847949 | 4 | float |
INFO - 08:58:58: +------+-------------+--------------------+-------------+-------+
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize f_1
INFO - 08:58:58: with respect to x
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: 1%| | 10/1000 [00:00<00:04, 228.59 it/sec, obj=[0.95084904 0.06744148]]
INFO - 08:58:58: 1%| | 11/1000 [00:00<00:04, 244.56 it/sec, obj=[0.99997026 0.77891095]]
INFO - 08:58:58: 1%| | 12/1000 [00:00<00:03, 264.63 it/sec, obj=[0.98859846 0.01317993]]
INFO - 08:58:58: 1%|▏ | 13/1000 [00:00<00:03, 272.38 it/sec, obj=[9.81345634e-01 2.10356748e-05]]
INFO - 08:58:58: 1%|▏ | 14/1000 [00:00<00:03, 286.13 it/sec, obj=[9.81688668e-01 3.45593287e-09]]
INFO - 08:58:58: 2%|▏ | 15/1000 [00:00<00:03, 299.23 it/sec, obj=[0.98168436 0. ]]
INFO - 08:58:58: 2%|▏ | 16/1000 [00:00<00:03, 311.63 it/sec, obj=[0.98168436 0. ]]
INFO - 08:58:58: 2%|▏ | 17/1000 [00:00<00:02, 328.93 it/sec, obj=[0.98168436 0. ]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the objective function are closer than ftol_rel or ftol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 11
INFO - 08:58:58: Solution:
INFO - 08:58:58: Objective: 0.0
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.5773502684847949 | 4 | float |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: Solving mNBI sub-problem for beta = [0.5 0.5]
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize -t_extraction
INFO - 08:58:58: with respect to t, x
INFO - 08:58:58: subject to constraints:
INFO - 08:58:58: beta_sub_optim_constraint <= 0.0
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: | t | -inf | 0 | inf | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: 2%|▏ | 18/1000 [00:00<00:04, 245.10 it/sec, obj=[0.63212056 0.63212056]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 4
INFO - 08:58:58: Solution:
INFO - 08:58:58: The solution is feasible.
INFO - 08:58:58: Objective: 0.1439142599466381
INFO - 08:58:58: Standardized constraints:
INFO - 08:58:58: beta_sub_optim_constraint = [ 8.32667268e-17 -1.38777878e-16]
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+------------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+------------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -6.407485192731112e-17 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -6.407485192731112e-17 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -6.407485192731112e-17 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.1439142599466381 | inf | float |
INFO - 08:58:58: +------+-------------+------------------------+-------------+-------+
INFO - 08:58:58: 2%|▏ | 19/1000 [00:00<00:05, 193.50 it/sec, obj=[0.63212056 0.63212056]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: None
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 26
INFO - 08:58:58: Solution:
INFO - 08:58:58: Objective: 0.8939534673502061
INFO - 08:58:58: Pareto efficient solutions:
INFO - 08:58:58: Pareto optimal points : 6 / 19
INFO - 08:58:58: Utopia point : [0. 0.]
INFO - 08:58:58: Compromise solution (closest to utopia) : [[0.06744148 0.95084904]
INFO - 08:58:58: [0.95084904 0.06744148]]
INFO - 08:58:58: Distance from utopia : 0.9532377715846151
INFO - 08:58:58: Objective values:
INFO - 08:58:58: +------+----------+----------+-----------+-----------+
INFO - 08:58:58: | name | 1 | 2 | 3 | 4 |
INFO - 08:58:58: +------+----------+----------+-----------+-----------+
INFO - 08:58:58: | 1 | 0 | 0.981684 | 0.0674415 | 0.950849 |
INFO - 08:58:58: | 2 | 0.981684 | 0 | 0.950849 | 0.0674415 |
INFO - 08:58:58: +------+----------+----------+-----------+-----------+
INFO - 08:58:58: Design space:
INFO - 08:58:58: +-------+-------------+---------+----------+----------+-----------+-------------+-------+
INFO - 08:58:58: | name | lower_bound | 1 | 2 | 3 | 4 | upper_bound | type |
INFO - 08:58:58: +-------+-------------+---------+----------+----------+-----------+-------------+-------+
INFO - 08:58:58: | x (1) | -4 | 0.57735 | -0.57735 | 0.424791 | -0.424791 | 4 | float |
INFO - 08:58:58: | x (2) | -4 | 0.57735 | -0.57735 | 0.424791 | -0.424791 | 4 | float |
INFO - 08:58:58: | x (3) | -4 | 0.57735 | -0.57735 | 0.424791 | -0.424791 | 4 | float |
INFO - 08:58:58: +-------+-------------+---------+----------+----------+-----------+-------------+-------+
Display the Pareto front¶
GEMSEO detects the Pareto optimal points and the dominated ones. The Fonseca-Fleming problem is interesting because its Pareto front is not convex. The mNBI algorithm successfully computes it.
execute_post(opt_problem, "ParetoFront", save=False, show=True)
<gemseo.post.pareto_front.ParetoFront object at 0x7f8aed72da90>
Solve the Fonseca-Fleming optimization problem more finely¶
The Pareto front is then refined with 10 sub-optimizations instead of 3.
opt_problem = FonsecaFleming()
result = execute_algo(
opt_problem,
"MNBI",
max_iter=1000,
sub_optim_max_iter=100,
n_sub_optim=10,
sub_optim_algo="NLOPT_SLSQP",
)
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize FonsecaFleming
INFO - 08:58:58: with respect to x
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: Solving optimization problem with algorithm MNBI:
INFO - 08:58:58: Searching for the individual optimum of each objective
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize f_0
INFO - 08:58:58: with respect to x
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: 1%| | 6/1000 [00:00<00:03, 282.12 it/sec, obj=[3.45593287e-09 9.81688668e-01]]
INFO - 08:58:58: 1%| | 7/1000 [00:00<00:03, 311.25 it/sec, obj=[0. 0.98168436]]
INFO - 08:58:58: 1%| | 8/1000 [00:00<00:02, 337.91 it/sec, obj=[0. 0.98168436]]
INFO - 08:58:58: 1%| | 9/1000 [00:00<00:02, 374.73 it/sec, obj=[0. 0.98168436]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the objective function are closer than ftol_rel or ftol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 11
INFO - 08:58:58: Solution:
INFO - 08:58:58: Objective: 0.0
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+--------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+--------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0.5773502684847949 | 4 | float |
INFO - 08:58:58: +------+-------------+--------------------+-------------+-------+
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize f_1
INFO - 08:58:58: with respect to x
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: 1%| | 10/1000 [00:00<00:04, 233.02 it/sec, obj=[0.95084904 0.06744148]]
INFO - 08:58:58: 1%| | 11/1000 [00:00<00:03, 249.12 it/sec, obj=[0.99997026 0.77891095]]
INFO - 08:58:58: 1%| | 12/1000 [00:00<00:03, 269.64 it/sec, obj=[0.98859846 0.01317993]]
INFO - 08:58:58: 1%|▏ | 13/1000 [00:00<00:03, 277.32 it/sec, obj=[9.81345634e-01 2.10356748e-05]]
INFO - 08:58:58: 1%|▏ | 14/1000 [00:00<00:03, 291.09 it/sec, obj=[9.81688668e-01 3.45593287e-09]]
INFO - 08:58:58: 2%|▏ | 15/1000 [00:00<00:03, 304.18 it/sec, obj=[0.98168436 0. ]]
INFO - 08:58:58: 2%|▏ | 16/1000 [00:00<00:03, 317.09 it/sec, obj=[0.98168436 0. ]]
INFO - 08:58:58: 2%|▏ | 17/1000 [00:00<00:02, 334.67 it/sec, obj=[0.98168436 0. ]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the objective function are closer than ftol_rel or ftol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 11
INFO - 08:58:58: Solution:
INFO - 08:58:58: Objective: 0.0
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.577350268484795 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.5773502684847949 | 4 | float |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: Solving mNBI sub-problem for beta = [0.11111111 0.88888889]
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize -t_extraction
INFO - 08:58:58: with respect to t, x
INFO - 08:58:58: subject to constraints:
INFO - 08:58:58: beta_sub_optim_constraint <= 0.0
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | 0 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | 0 | 4 | float |
INFO - 08:58:58: | t | -inf | 0 | inf | float |
INFO - 08:58:58: +------+-------------+-------+-------------+-------+
INFO - 08:58:58: 2%|▏ | 18/1000 [00:00<00:03, 249.40 it/sec, obj=[0.90043834 0.20664322]]
INFO - 08:58:58: 2%|▏ | 19/1000 [00:00<00:03, 257.47 it/sec, obj=[0.91873293 0.15869784]]
INFO - 08:58:58: 2%|▏ | 20/1000 [00:00<00:03, 265.54 it/sec, obj=[0.91966962 0.15614908]]
INFO - 08:58:58: 2%|▏ | 21/1000 [00:00<00:03, 273.28 it/sec, obj=[0.91967277 0.15614049]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 7
INFO - 08:58:58: Solution:
INFO - 08:58:58: The solution is feasible.
INFO - 08:58:58: Objective: 0.04794255057736304
INFO - 08:58:58: Standardized constraints:
INFO - 08:58:58: beta_sub_optim_constraint = [-9.53889745e-14 1.10154941e-13]
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.3394642613023262 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.3394642613023261 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.339464261302326 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.04794255057736304 | inf | float |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: Solving mNBI sub-problem for beta = [0.22222222 0.77777778]
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize -t_extraction
INFO - 08:58:58: with respect to t, x
INFO - 08:58:58: subject to constraints:
INFO - 08:58:58: beta_sub_optim_constraint <= 0.0
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.3394642613023262 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.3394642613023261 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.339464261302326 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.04794255057736304 | inf | float |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: 2%|▏ | 22/1000 [00:00<00:04, 225.84 it/sec, obj=[0.91967277 0.15614049]]
INFO - 08:58:58: 2%|▏ | 23/1000 [00:00<00:04, 232.55 it/sec, obj=[0.84203912 0.33739501]]
INFO - 08:58:58: 2%|▏ | 24/1000 [00:00<00:04, 239.34 it/sec, obj=[0.85527677 0.31046303]]
INFO - 08:58:58: 2%|▎ | 25/1000 [00:00<00:03, 245.45 it/sec, obj=[0.85546004 0.31007996]]
INFO - 08:58:58: 3%|▎ | 26/1000 [00:00<00:03, 251.65 it/sec, obj=[0.85546008 0.31007988]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the objective function are closer than ftol_rel or ftol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 8
INFO - 08:58:58: Solution:
INFO - 08:58:58: The solution is feasible.
INFO - 08:58:58: Objective: 0.09364292443480814
INFO - 08:58:58: Standardized constraints:
INFO - 08:58:58: beta_sub_optim_constraint = [ 1.03119223e-09 -4.66331571e-10]
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.2256025149680226 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.2256025149680226 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.2256025149680226 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.09364292443480814 | inf | float |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: Solving mNBI sub-problem for beta = [0.33333333 0.66666667]
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize -t_extraction
INFO - 08:58:58: with respect to t, x
INFO - 08:58:58: subject to constraints:
INFO - 08:58:58: beta_sub_optim_constraint <= 0.0
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.2256025149680226 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.2256025149680226 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.2256025149680226 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.09364292443480814 | inf | float |
INFO - 08:58:58: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:58: 3%|▎ | 27/1000 [00:00<00:04, 217.65 it/sec, obj=[0.85546008 0.31007987]]
INFO - 08:58:58: 3%|▎ | 28/1000 [00:00<00:04, 222.95 it/sec, obj=[0.77161692 0.45984451]]
INFO - 08:58:58: 3%|▎ | 29/1000 [00:00<00:04, 228.10 it/sec, obj=[0.77767797 0.45048948]]
INFO - 08:58:58: 3%|▎ | 30/1000 [00:00<00:04, 233.24 it/sec, obj=[0.77769345 0.45046533]]
INFO - 08:58:58: Optimization result:
INFO - 08:58:58: Optimizer info:
INFO - 08:58:58: Status: None
INFO - 08:58:58: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:58: Number of calls to the objective function by the optimizer: 6
INFO - 08:58:58: Solution:
INFO - 08:58:58: The solution is feasible.
INFO - 08:58:58: Objective: 0.1255364934686558
INFO - 08:58:58: Standardized constraints:
INFO - 08:58:58: beta_sub_optim_constraint = [-9.90765803e-12 -5.96217520e-13]
INFO - 08:58:58: Design space:
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.1306276041616624 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.1306276041616625 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.1306276041616625 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.1255364934686558 | inf | float |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: Solving mNBI sub-problem for beta = [0.44444444 0.55555556]
INFO - 08:58:58: Optimization problem:
INFO - 08:58:58: minimize -t_extraction
INFO - 08:58:58: with respect to t, x
INFO - 08:58:58: subject to constraints:
INFO - 08:58:58: beta_sub_optim_constraint <= 0.0
INFO - 08:58:58: over the design space:
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: | x[0] | -4 | -0.1306276041616624 | 4 | float |
INFO - 08:58:58: | x[1] | -4 | -0.1306276041616625 | 4 | float |
INFO - 08:58:58: | x[2] | -4 | -0.1306276041616625 | 4 | float |
INFO - 08:58:58: | t | -inf | -0.1255364934686558 | inf | float |
INFO - 08:58:58: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:58: 3%|▎ | 31/1000 [00:00<00:04, 207.01 it/sec, obj=[0.77769345 0.45046533]]
INFO - 08:58:58: 3%|▎ | 32/1000 [00:00<00:04, 211.28 it/sec, obj=[0.68170374 0.57895294]]
INFO - 08:58:58: 3%|▎ | 33/1000 [00:00<00:04, 215.62 it/sec, obj=[0.68463821 0.57556413]]
INFO - 08:58:58: 3%|▎ | 34/1000 [00:00<00:04, 220.00 it/sec, obj=[0.68463912 0.57556308]]
INFO - 08:58:59: Optimization result:
INFO - 08:58:59: Optimizer info:
INFO - 08:58:59: Status: None
INFO - 08:58:59: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:59: Number of calls to the objective function by the optimizer: 6
INFO - 08:58:59: Solution:
INFO - 08:58:59: The solution is feasible.
INFO - 08:58:59: Objective: 0.14185712248151133
INFO - 08:58:59: Standardized constraints:
INFO - 08:58:59: beta_sub_optim_constraint = [1.02950981e-12 4.25381952e-13]
INFO - 08:58:59: Design space:
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | -0.04287486268043029 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | -0.04287486268043034 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | -0.04287486268043035 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.1418571224815113 | inf | float |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: Solving mNBI sub-problem for beta = [0.55555556 0.44444444]
INFO - 08:58:59: Optimization problem:
INFO - 08:58:59: minimize -t_extraction
INFO - 08:58:59: with respect to t, x
INFO - 08:58:59: subject to constraints:
INFO - 08:58:59: beta_sub_optim_constraint <= 0.0
INFO - 08:58:59: over the design space:
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | -0.04287486268043029 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | -0.04287486268043034 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | -0.04287486268043035 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.1418571224815113 | inf | float |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: 4%|▎ | 35/1000 [00:00<00:04, 199.34 it/sec, obj=[0.68463912 0.57556308]]
INFO - 08:58:59: 4%|▎ | 36/1000 [00:00<00:04, 202.97 it/sec, obj=[0.57513103 0.68501143]]
INFO - 08:58:59: 4%|▎ | 37/1000 [00:00<00:04, 206.86 it/sec, obj=[0.5755631 0.6846391]]
INFO - 08:58:59: 4%|▍ | 38/1000 [00:00<00:04, 210.69 it/sec, obj=[0.57556308 0.68463912]]
INFO - 08:58:59: Optimization result:
INFO - 08:58:59: Optimizer info:
INFO - 08:58:59: Status: None
INFO - 08:58:59: Message: Successive iterates of the objective function are closer than ftol_rel or ftol_abs. GEMSEO Stopped the driver
INFO - 08:58:59: Number of calls to the objective function by the optimizer: 7
INFO - 08:58:59: Solution:
INFO - 08:58:59: The solution is feasible.
INFO - 08:58:59: Objective: 0.14185712248204044
INFO - 08:58:59: Standardized constraints:
INFO - 08:58:59: beta_sub_optim_constraint = [1.42996726e-13 3.05810932e-13]
INFO - 08:58:59: Design space:
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.04287486268025626 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.04287486268025616 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.04287486268025619 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.1418571224820404 | inf | float |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: Solving mNBI sub-problem for beta = [0.66666667 0.33333333]
INFO - 08:58:59: Optimization problem:
INFO - 08:58:59: minimize -t_extraction
INFO - 08:58:59: with respect to t, x
INFO - 08:58:59: subject to constraints:
INFO - 08:58:59: beta_sub_optim_constraint <= 0.0
INFO - 08:58:59: over the design space:
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.04287486268025626 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.04287486268025616 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.04287486268025619 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.1418571224820404 | inf | float |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: 4%|▍ | 39/1000 [00:00<00:04, 193.96 it/sec, obj=[0.57556308 0.68463912]]
INFO - 08:58:59: 4%|▍ | 40/1000 [00:00<00:04, 197.31 it/sec, obj=[0.45294727 0.77609783]]
INFO - 08:58:59: 4%|▍ | 41/1000 [00:00<00:04, 200.75 it/sec, obj=[0.45046707 0.77769234]]
INFO - 08:58:59: 4%|▍ | 42/1000 [00:00<00:04, 204.11 it/sec, obj=[0.45046533 0.77769345]]
INFO - 08:58:59: Optimization result:
INFO - 08:58:59: Optimizer info:
INFO - 08:58:59: Status: None
INFO - 08:58:59: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:59: Number of calls to the objective function by the optimizer: 6
INFO - 08:58:59: Solution:
INFO - 08:58:59: The solution is feasible.
INFO - 08:58:59: Objective: 0.1255364934616085
INFO - 08:58:59: Standardized constraints:
INFO - 08:58:59: beta_sub_optim_constraint = [1.48561718e-13 9.68516933e-13]
INFO - 08:58:59: Design space:
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.1306276041658536 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.1306276041658536 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.1306276041658536 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.1255364934616085 | inf | float |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: Solving mNBI sub-problem for beta = [0.77777778 0.22222222]
INFO - 08:58:59: Optimization problem:
INFO - 08:58:59: minimize -t_extraction
INFO - 08:58:59: with respect to t, x
INFO - 08:58:59: subject to constraints:
INFO - 08:58:59: beta_sub_optim_constraint <= 0.0
INFO - 08:58:59: over the design space:
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.1306276041658536 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.1306276041658536 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.1306276041658536 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.1255364934616085 | inf | float |
INFO - 08:58:59: +------+-------------+---------------------+-------------+-------+
INFO - 08:58:59: 4%|▍ | 43/1000 [00:00<00:05, 189.52 it/sec, obj=[0.45046533 0.77769345]]
INFO - 08:58:59: 4%|▍ | 44/1000 [00:00<00:04, 192.44 it/sec, obj=[0.31697497 0.85214023]]
INFO - 08:58:59: 4%|▍ | 45/1000 [00:00<00:04, 195.44 it/sec, obj=[0.31010616 0.85544751]]
INFO - 08:58:59: 5%|▍ | 46/1000 [00:00<00:04, 198.47 it/sec, obj=[0.31007988 0.85546008]]
INFO - 08:58:59: Optimization result:
INFO - 08:58:59: Optimizer info:
INFO - 08:58:59: Status: None
INFO - 08:58:59: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:59: Number of calls to the objective function by the optimizer: 6
INFO - 08:58:59: Solution:
INFO - 08:58:59: The solution is feasible.
INFO - 08:58:59: Objective: 0.09364292499323551
INFO - 08:58:59: Standardized constraints:
INFO - 08:58:59: beta_sub_optim_constraint = [ 8.56675841e-13 -2.60819144e-12]
INFO - 08:58:59: Design space:
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.225602514270673 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.2256025142706731 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.225602514270673 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.09364292499323551 | inf | float |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: Solving mNBI sub-problem for beta = [0.88888889 0.11111111]
INFO - 08:58:59: Optimization problem:
INFO - 08:58:59: minimize -t_extraction
INFO - 08:58:59: with respect to t, x
INFO - 08:58:59: subject to constraints:
INFO - 08:58:59: beta_sub_optim_constraint <= 0.0
INFO - 08:58:59: over the design space:
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.225602514270673 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.2256025142706731 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.225602514270673 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.09364292499323551 | inf | float |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: 5%|▍ | 47/1000 [00:00<00:05, 186.07 it/sec, obj=[0.31007988 0.85546008]]
INFO - 08:58:59: 5%|▍ | 48/1000 [00:00<00:05, 188.85 it/sec, obj=[0.17146323 0.91399085]]
INFO - 08:58:59: 5%|▍ | 49/1000 [00:00<00:04, 191.74 it/sec, obj=[0.15642562 0.91956815]]
INFO - 08:58:59: 5%|▌ | 50/1000 [00:00<00:04, 194.45 it/sec, obj=[0.1561406 0.91967273]]
INFO - 08:58:59: 5%|▌ | 51/1000 [00:00<00:04, 197.20 it/sec, obj=[0.15614049 0.91967277]]
INFO - 08:58:59: Optimization result:
INFO - 08:58:59: Optimizer info:
INFO - 08:58:59: Status: None
INFO - 08:58:59: Message: Successive iterates of the design variables are closer than xtol_rel or xtol_abs. GEMSEO Stopped the driver
INFO - 08:58:59: Number of calls to the objective function by the optimizer: 7
INFO - 08:58:59: Solution:
INFO - 08:58:59: The solution is feasible.
INFO - 08:58:59: Objective: 0.04794255057731033
INFO - 08:58:59: Standardized constraints:
INFO - 08:58:59: beta_sub_optim_constraint = [-1.83464355e-14 2.24126273e-14]
INFO - 08:58:59: Design space:
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | Name | Lower bound | Value | Upper bound | Type |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: | x[0] | -4 | 0.3394642613024756 | 4 | float |
INFO - 08:58:59: | x[1] | -4 | 0.3394642613024756 | 4 | float |
INFO - 08:58:59: | x[2] | -4 | 0.3394642613024756 | 4 | float |
INFO - 08:58:59: | t | -inf | -0.04794255057731033 | inf | float |
INFO - 08:58:59: +------+-------------+----------------------+-------------+-------+
INFO - 08:58:59: 5%|▌ | 52/1000 [00:00<00:05, 183.41 it/sec, obj=[0.15614049 0.91967277]]
INFO - 08:58:59: Optimization result:
INFO - 08:58:59: Optimizer info:
INFO - 08:58:59: Status: None
INFO - 08:58:59: Message: None
INFO - 08:58:59: Number of calls to the objective function by the optimizer: 80
INFO - 08:58:59: Solution:
INFO - 08:58:59: Objective: 0.8939534673502061
INFO - 08:58:59: Pareto efficient solutions:
INFO - 08:58:59: Pareto optimal points : 42 / 52
INFO - 08:58:59: Utopia point : [0. 0.]
INFO - 08:58:59: Compromise solution (closest to utopia) : [[0.63212056 0.63212056]]
INFO - 08:58:59: Distance from utopia : 0.8939534673502061
INFO - 08:58:59: Objective values:
INFO - 08:58:59: +------+----------+----------+----------+
INFO - 08:58:59: | name | 1 | 2 | 3 |
INFO - 08:58:59: +------+----------+----------+----------+
INFO - 08:58:59: | 1 | 0 | 0.981684 | 0.632121 |
INFO - 08:58:59: | 2 | 0.981684 | 0 | 0.632121 |
INFO - 08:58:59: +------+----------+----------+----------+
INFO - 08:58:59: Design space:
INFO - 08:58:59: +-------+-------------+---------+----------+---+-------------+-------+
INFO - 08:58:59: | name | lower_bound | 1 | 2 | 3 | upper_bound | type |
INFO - 08:58:59: +-------+-------------+---------+----------+---+-------------+-------+
INFO - 08:58:59: | x (1) | -4 | 0.57735 | -0.57735 | 0 | 4 | float |
INFO - 08:58:59: | x (2) | -4 | 0.57735 | -0.57735 | 0 | 4 | float |
INFO - 08:58:59: | x (3) | -4 | 0.57735 | -0.57735 | 0 | 4 | float |
INFO - 08:58:59: +-------+-------------+---------+----------+---+-------------+-------+
Display the Pareto front¶
We can clearly see the effect of the refinement.
execute_post(opt_problem, "ParetoFront", save=False, show=True)
<gemseo.post.pareto_front.ParetoFront object at 0x7f8aeda8ba30>
Total running time of the script: (0 minutes 0.840 seconds)